We believe that these are the best performing rollers on the market.
Their superior performance means reduced downtime due to failure and cost savings over the life of the conveyor. EU-ROLLER was developed to improve on the lifespan of conventional rollers by eliminating the negative characteristics.
Most roller failures are due to bearing failure, usually the result of either, poor bearing selection or most likely the ingress of foreign material into the bearing, causing wear and premature failure.
EU-ROLLER uses quality bearings chosen to meet the requirements of any loading or transporting application. In order to protect and provide longevity for the bearings EU-ROLLER uses our proven patented bearing cap and seal design which contains special seals.
(This design is so effective; that tests show there is no ingress of foreign material when tested under Talc and water.)
By excluding foreign material from the bearing housing, EU-ROLLER maximizes bearing life and extends roller performance.
EU-ROLLER offers superior performance for conveyor applications that require operation in adverse conditions.
The outer shell is made from High Density Polyethylene (HDPE) meaning it can be used in a wide range of environments and is approximately 60% of the weight of conventional steel rollers, making for safer installation and saving on start-up costs.
The steel tube increases rigidity of the roller shell and enables the EU-ROLLER to be used over wider ranging belt widths and aids in the elimination of shaft deflection.
Test results show that the noise emission of EU-ROLLER is considerably lower compared to the conventional ones. The raising standards to reduce the environmental impact make EU-ROLLER an ideal choice.
The manufacturing process ensures outer shell concentricity to the roller shaft, meaning that all EU-ROLLERS are of weigh-roller quality.
EU-ROLLER has the ability to retrofit their roller to any existing frames.
Previously there were only standard steel rollers available at this size range on the market.
The above features coupling with guaranteed technologies providing continuous quality mean that EU-ROLLER should be the best choice for all conveyor applications.
EU-Roller is a H.D.P.E. conveyor idler roller, manufactured from the latest and best materials at present time, and a superior design for the conveyor systems.
Advantage of the roller:
127 and 133 mm Diameter 25-Series
152 and 159 mm Diameter 25, 30 and 40 Series
178 mm Diameter 30, 40 and 50 Series
194 mm Diameter 40 and 50 Series
Standard, Anti-Seize, Side, and Heavy Duty Series
Length of rollers to suit the customer (180 mm to 2050 mm)
IMPACT AND PICKING-IDLER SERIES
EU-Roller Impact is a superior designed Impact conveyor roller, manufactured from 6MM Marine Grade Aluminum tube, Rubber Impact absorption rings and assembled around the patented bearing cap assembly.
Advantage of the Impact Range:
Standard, Anti-Seize, Side and Heavy Duty Series
Length of rollers to suit the customer (180mm to 2050 mm)